EarthQuaker Zoar Dynamic Audio Grinder Fuzz Distortion Pedal

Great Grind – The EarthQuaker Zoar Dynamic Audio Grinder Fuzz Distortion Pedal

The EarthQuaker Zoar reaches back the past and keeps its eyes on the future. A classic fuzz living communally with a time tested three band passive EQ section; informed by modern precision and a little bit of midwestern witchcraft. A tool designed to delight the seekers and the purists alike. Foot in the gutter, fist on the gold if you will…

The Zoar is a medium-high gain discrete distortion (using only transistors; no opamps or diodes in here) that has that touch sensitive amp-like quality to it that everyone craves. It has been finely tuned to create some highly tweakable hi-fi and modern sounding distortion, but with the ghosts of old school circuitry to deliver a grind that is both instantly familiar and delightfully unique.

That? Then This

Want that defined sparkle and tightness of an overdrive? This has it. Want that low-medium gain fuzz that’s perfect for drop tuned guitars and basses? This has it. Want to be able to dial in and control every nuance of your tone from jangly on-the-verge of break up to blowing the walls out heavy saturation? Then this is the pedal for you.

Gain

The Gain control on Zoar goes from the edge of break up all the way over the cliff into the crunchy, grinding abyss. The character of the distortion is heavily dependent on the setting of the Weight control as well as the pickup type and further fine-tuned by the EQ section.

Dial It In

While having its roots in a very familiar past, the passive 3-band EQ has been finely tuned for modern tones. While this style of tone shaping seems simple on the surface, it is deceptively complex and highly interactive. Here are a few pointers for dialing in Zoar and learning all it has to teach.

• If Bass, Middle and Treble all are zeroed out, no sound shall pass; this is the nature of a passive EQ
• Turning up any one of the three bands will affect the other two
• Setting all three bands in unison at noon will give you a completely different response than setting them all in unison elsewhere, say at 9 o’clock, 1 o’clock, or 2 o’clock (you get the idea…)

Weight

The 3-Band EQ and Gain controls give you nearly unlimited options with great focus and sensitive precision, but the real powerhouse of Zoar is the Weight control. This control dictates the amount of low end that is passed into the circuit, thus controlling the entire character of the pedal. Simply dial in the 3-Band EQ to 12 o’clock and adjust the Weight to see how drastically it dictates your sound. From a mere clean boost to a high gain distortion to overdrive to the crispy Hi-Fi fuzz territory, this function gives you everything.

Unity

The Level control hits unity around noon, but this is dependent on where the other controls are set. In addition to controlling the output volume, it also plays a small part in the controlling the voice of Zoar. By adjusting the Level control with any combination of EQ (boosting the frequency bands and cutting the output volume), you can achieve drastically different curves that have the feel of the more traditional low pass filter type tone control.

High Voltage Sonics

Want to elevate your sonic spirit to a higher level? Try running Zoar at higher voltage! Zoar can handle power up to 18v DC. Higher voltages will yield a different frequency response with more defined dynamics and a faster response. When powered at 18v, the range of clean tones are widened, dirty tones become punchier with better note articulation, low frequencies are tightened, higher frequencies will cover a broader spectrum without becoming harsh and the output volume nearly doubles – the experience is not unlike plugging into a wall of high wattage tube amplifiers!

Spirit of Zoar

Each Zoar Dynamic Audio Grinder is crafted just north of Zoar mountain in the EarthQuaker Devices colony by many delightful humans and one loving robot under the guiding spirit of the Zoarites.

SPECIFICATIONS

• Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
• Current Draw: 10 mA
• Input Impedance: 1 MΩ
• Output Impedance: <10 kΩ
• Power: This device takes a 9-18 volt DC power supply with a standard 2.1mm negative center barrel plug. We recommend using a pedal-specific, transformer-isolated, wall-wart power supply or a power supply with multiple isolated-outputs. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not always filter dirty power and may result in unwanted noise. DO NOT POWER THE ZOAR HIGHER THAN 18V!

Manufacturer: EarthQuaker Devices
Model: ZOAR
SKU: I758161-N-2-WHXA
UPC: 810019913631

We are Chuck Levin’s Washington Music Center

Since 1958, Chuck Levin’s Washington Music Center has been the trusted destination for musicians and audio professionals across Maryland, Virginia, and Washington, D.C. Family-owned and operated, our legendary music store delivers Everything in Music®—from instruments and recording gear to pro audio, rentals, and repair services.

Our team of musicians and industry experts lives and breathes gear, helping you build the perfect setup for your next performance, studio session, or installation. As an authorized dealer for top brands, we also offer our award-winning CHUCKSCLUSIVE line—exclusive, limited-edition instruments and collaborations recognized with the NAMM Top 100 Dealer Innovation Award for redefining what a music retail experience can be.

Chuck Levin’s isn’t just a store—it’s a community built by players, engineers, and creators who share a lifelong passion for sound. Stop by our legendary Wheaton, MD showroom or contact us anytime for expert advice, product questions, or the best possible deal on your next piece of gear.