Yamaha FSC-TA TransAcoustic Concert Cutaway Acoustic-Electric Guitar – Vintage Tint

The Yamaha TransAcoustic guitar recreates an incredible experience without needing any external amplification or effects, just the guitar itself. With built-in reverb and chorus at your fingertips, it’s the most inspiring, engaging acoustic guitar you’ll ever play.

Actuator
An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.

Simple Controls
Three simple knobs let you adjust the amount of effects and the line out volume level. Keeping the controls small minimizes the area of the holes in the body material, which reduces acoustic sound loss.
(A) Chorus Control
(B) Reverb Control (Room / Hall)
(C) TA Switch / Line Out Volume Control

* Pressing the TA Switch for longer than 0.3 seconds activates the TA function.
* When a cable is connected to the line out jack, the line out volume can be adjusted by rotating knob (C).
* The reverb type switches from Room to Hall around the 12:00 position.

Designed to Provide Superb Acoustic Guitar Sound
The body is a solid spruce top with mahogany back and sides guitar based on the FG-series.
Louder and stronger sound in the low- to mid-ranges, thanks to cutting-edge acoustic analysis technology developed by the Yamaha R&D Division and a newly-designed scalloped bracing pattern.

Newly-Designed Battery Box
The battery box integrated into the end-pin jack requires fewer holes in the body. This reduces acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic-electric guitar.

FEATURES

• Concert sized body
• Solid spruce top
• Mahogany back and sides
• Amazing sounding reverb/chorus built into the guitar with no need for external amplification or effects
• New scalloped bracing for louder, richer acoustic sound

*Case or gig bag sold separately

SPECIFICATIONS

• Body Shape: TransAcoustic Concert
• Top Wood: Solid Spruce
• Back & Sides Wood: Mahogany
• Binding: Cream
• Neck Wood: Nato
• Radius: 15.75″
• Fingerboard Material: Rosewood
• Fingerboard Inlay: Dots
• Number of Frets: 20
• Scale Length: 25″
• Tuning Machines: Die-cast Chrome
• Bridge Material: Rosewood
• Nut/Saddle Material: Urea/Urea
• Nut Width: 1.692″
• Electronics: System70 TransAcoustic
• Strings: Elixir .012-.053

*Case or gig bag sold separately

Model# FSC-TA VT